And this is what we’re using the sensor with index 1 for – to measure the GPU temperature. Instead such sensors show negative values here. tpacpi (#GPU) – this array of sensors represents pretty much the same temperatures as the one below (the chassis one), but with a little difference: the sensors are never missing here even if the device is offline (like GPU for example).A you can see, we have multiple hwmon entries having different names in the configuration file, here’s what they are: We use it to monitor CPU, SSD, WLAN and other devices’ temperature. hwmon – specifies a generic temperature sensor.Using nvml prevents the GPU from switching to suspend power state, causing battery drain and high temperatures. ‼️ IMPORTANT‼️: avoid using nvml option (temperatures read from proprietary nVidia GPU driver). Sensors section of the configuration file describes all the thermal sensors thinkfan will use to keep an eye on the temperature. If you’re interested in what exactly all the above-mentioned configuration options do, welcome to this deep dive section. With this configuration the fan will be kept at a reasonably quiet level while still allowing you to use the ThinkPad on top of your laps. Configure thinkfan to use the newly created fileĮcho 'THINKFAN_ARGS="-c /etc/nf"' | sudo tee -a /etc/default/thinkfan.Create a new thinkfan configuration file.Echo 'options thinkpad_acpi fan_control=1' | sudo tee /lib/modprobe.d/thinkpad_nf
0 kommentar(er)
